The 5.0mm Guide Sleeve Without Cleat With Lip is designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. Can be used with printed guides.

Dimensions:

• 5.0mm ID x 5.6mm OD x 4mm L
• 6.2mm lip OD x .025mm lip thickness

Pair with:

• 3021 - 5.0mm Depth Stop Drill Set
• 3022 - 5.0mm Fully Guided Drill Set
• 3038 - 5.0mm Flattening Drill

Relevant Presentations:

- COMPLETE DENTURE CONUS ABUTMENT CASE
- GREATER ACCURACY WHEN USING SMALLER DIAMETER DIAGNOSTIC GUIDE SLEEVES