A silver metal drill with the label ‘Flatt’ on the front.
A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 4.9 millimeters.

5.0 mm Flattening Drill

$25.00
SKU: 3038
Shipping calculated at checkout.

Advantages, Protocol, and Maintenance: 5.0 mm Depth Stop Drill Manual

Must be used with: Guide Sleeve - Without Cleat - With Lip - 5.0 mm x 5.56 mm or Guide Sleeve - Without Cleat - With Lip - 5.0 mm x 5.6 mm

The stainless steel 5.0 mm Flattening Drill is designed to remove soft tissue and to flatten the alveolar ridge when a pointed alveolar crest would deflect the initial drill off to one side or the other. Once the crestal/angled bone is flattened, a Pilot Drill can be used to start the osteotomy without deflection.

    Pair with:

    Users of DePlaque Inc. drills have the responsibility to determine whether the diameter and length of these products are suitable for the particular surgical procedure.

    A silver metal drill with the label ‘Flatt’ on the front.
    A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 4.9 millimeters.

    You might also like…