Skip to content

Drills + Components

Protocol, maintenance, + more information: 3.0 mm Lindemann Depth Stop Drill Manual, 3.9 mm Depth Stop Drill Manual, 4.4 mm Depth Stop Drill Manual, 4.4 mm + 5.0 mm Depth Stop Crestal Sinus Elevation Drill Sets Manual, + 5.0 mm Depth Stop Drill Manual
Filter and sort

17 products

Clear all
A singular silver metal drill shown vertically.

3/32" Plaster Drill

$4.00

3/32" Plaster Drill

3/32" Plaster Drill

A singular silver metal drill shown vertically.

Hybrid Surgical Drill

$100.00

Hybrid Surgical Drill

Hybrid Surgical Drill

A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 3.8 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

3.0 mm Flattening Drill

$25.00

3.0 mm Flattening Drill

3.0 mm Flattening Drill

A silver metal drill with the label ‘Pilot’ on the front, labeled 35 millimeters long and an OD of 3.85 millimeters. A silver metal drill with the label ‘Pilot’ on the front.

3.0 mm Pilot Drill

$25.00

3.0 mm Pilot Drill

3.0 mm Pilot Drill

A silver metal drill with a curved rectangular notch in the center, labeled 30 millimeters long, an ID of 2.75 millimeters and an OD of 3.8 millimeters. A silver metal drill with a curved rectangular notch in the center.

3.85 mm Punch Drill

$25.00

3.85 mm Punch Drill

3.85 mm Punch Drill

A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 3.8 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

3.85 mm Flattening Drill

$25.00

3.85 mm Flattening Drill

3.85 mm Flattening Drill

A silver metal drill with the label ‘Pilot’ on the front, labeled 35 millimeters long and an OD of 3.85 millimeters. A silver metal drill with the label ‘Pilot’ on the front.

3.85 mm Pilot Drill

$25.00

3.85 mm Pilot Drill

3.85 mm Pilot Drill

A silver metal drill with a curved rectangular notch in the center, labeled 30 millimeters long and an OD of 4.4 millimeters. A silver metal drill with a curved rectangular notch in the center.

4.4 mm Punch Drill

$25.00

4.4 mm Punch Drill

4.4 mm Punch Drill

A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 4.4 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

4.4 mm Flattening Drill

$25.00

4.4 mm Flattening Drill

4.4 mm Flattening Drill

A silver metal drill with the label ‘Pilot’ on the front, labeled 35 millimeters long and an OD of 4.4 millimeters. A silver metal drill with the label ‘Pilot’ on the front.

4.4 mm Pilot Drill

$25.00

4.4 mm Pilot Drill

4.4 mm Pilot Drill

A silver metal drill with a curved rectangle notch, labeled 30 mm long and an ID of 4.85 millimeters and an OD of 4.9 millimeters. A silver metal drill with a curved rectangle notch in the center.

5.0 mm Punch Drill

$25.00

5.0 mm Punch Drill

5.0 mm Punch Drill

A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 4.9 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

5.0 mm Flattening Drill

$25.00

5.0 mm Flattening Drill

5.0 mm Flattening Drill

A silver metal drill with the label ‘Pilot’ on the front, labeled 35 millimeters long and an OD of 4.4 millimeters. A silver metal drill with the label ‘Pilot’ on the front.

5.0 mm Pilot Drill

$25.00

5.0 mm Pilot Drill

5.0 mm Pilot Drill

A silver metal plugger with two concave tips at either end of the handle, marked at 2 millimeter intervals.

Concave Plugger

$175.00

Concave Plugger

Concave Plugger

A silver metal cylinder with a circular cut out. The top is cone shaped with a square tip. The cylinder is 20 millimeters long with an OD of 8 millimeters, and the cone is 7 millimeters long. There is a 3/32 inch channel opening. A silver metal cylinder with a circular cut out. The top is cone shaped with a square tip.

Handheld Drill Handle

$25.00

Handheld Drill Handle

Handheld Drill Handle

A square practice model for sinus elevation with four quadrants.

Sinus Elevation Practice Model

$15.00

Sinus Elevation Practice Model

Sinus Elevation Practice Model

A black square box with 5 rows of 7 drill storage slots each. The top row starts with 3.7 to 4.7 millimeter diameter drills in lengths from 4 to 10 millimeters. The bottom row ends with 1.5 to 2.2 millimeter diameter drills in lengths from 4 to 10 millimeters.

Sinus Elevation Cold Block

$250.00

Sinus Elevation Cold Block

Sinus Elevation Cold Block

Search

Shopping Cart

Your cart is currently empty

Shop now