The 5.0 mm Guide Sleeve Without Cleat With Lip is for use with printed guides only. Sleeves are designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole.

Dimensions:

• ID 5.0 mm x OD 5.56 mm x 4 mm L
• OD 6.2 mm lip x .05 mm lip thickness

Pair with:

• 3021 - 5.0 mm Depth Stop Drill Set
• 3038 - 5.0 mm Flattening Drill
• 9052BSB - 5.0 mm Fabrication Insert (FABIN)