The 4.0 mm Guide Sleeve Without Cleat With Lip are designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. Can be used with printed guides.

Dimensions:

• ID 4 mm x OD 5 mm x 6 mm L
• OD 6.2 mm lip x .05 mm lip thickness

Pair with:

• 2-Piece Straight Guide Post - No Offset
• 2-Piece Guide Post Upper Removable Part (URP) - 3.9 mm OD
• Guide Sleeve Insert - 3.0 mm for 4.0 mm Guide Sleeve
• 4.0 mm Fabrication Insert (FABIN)
• 3.85 mm Flattening Drill

Relevant Presentations:

- STEPS TO MAKING A SURGICAL GUIDE