Drill Index

Drills can be purchased individually for one time use at $40 each by phone order only at (585) 924-3190.

3.0 Lindemann Depth Stop Drill Set:

  • 30L6- 3.0 mm depth stop x 6 mm L
  • 30L8- 3.0 mm depth stop x 8 mm L
  • 30L10- 3.0 mm depth stop x 10 mm L
  • 30L12- 3.0 mm depth stop x 12 mm L
  • 30L14- 3.0 mm depth stop x 14 mm L
  • 30L16- 3.0 mm depth stop x 16 mm L

3.9 mm Depth Stop Drill Set:

  • 39156- 3.9 mm depth stop x 1.5 - 2.2 mm taper x 6 mm L
  • 39158- 3.9 mm depth stop x 1.5 - 2.2 mm taper x 8 mm L
  • 391510- 3.9 mm depth stop x 1.5 - 2.2 mm taper x 10 mm L
  • 3915115- 3.9 mm depth stop x 1.5 - 2.2 mm taper x 11.5 mm L
  • 391513- 3.9 mm depth stop x 1.5 - 2.2 mm taper x 13 mm L
  • 391515- 3.9 mm depth stop x 1.5 - 2.2 mm taper x 15 mm L
  • 39206- 3.9 mm depth stop x 2.0 - 2.9 mm taper x 6 mm L
  • 39208- 3.9 mm depth stop x 2.0 - 2.9 mm taper x 8 mm L
  • 392010- 3.9 mm depth stop x 2.0 - 2.9 mm taper x 10 mm L
  • 3920115- 3.9 mm depth stop x 2.0 - 2.9 mm taper x 11.5 mm L
  • 392013- 3.9 mm depth stop x 2.0 - 2.9 mm taper x 13 mm L
  • 392015- 3.9 mm depth stop x 2.0 - 2.9 mm taper x 15 mm L
  • 39276- 3.9 mm depth stop x 2.7 - 3.2 mm taper x 6 mm L
  • 39278- 3.9 mm depth stop x 2.7 - 3.2 mm taper x 8 mm L
  • 392710- 3.9 mm depth stop x 2.7 - 3.2 mm taper x 10 mm L
  • 3927115- 3.9 mm depth stop x 2.7 - 3.2 mm taper x 11.5 mm L
  • 392713- 3.9 mm depth stop x 2.7 - 3.2 mm taper x 13 mm L
  • 392715- 3.9 mm depth stop x 2.7 - 3.2 mm taper x 15 mm L
  • 39286- 3.9 mm depth stop x 2.8 - 3.7 mm taper x 6 mm L
  • 39288- 3.9 mm depth stop x 2.8 - 3.7 mm taper x 8 mm L
  • 392810- 3.9 mm depth stop x 2.8 - 3.7 mm taper x 10 mm L
  • 3928115- 3.9 mm depth stop x 2.8 - 3.7 mm taper x 11.5 mm L
  • 392813- 3.9 mm depth stop x 2.8 - 3.7 mm taper x 13 mm L
  • 392815- 3.9 mm depth stop x 2.8 - 3.7 mm taper x 15 mm L

4.4 mm Depth Stop Drill Set:

  • 44156- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 6 mm L
  • 44158- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 8 mm L
  • 441510- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 10 mm L
  • 4415115- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 11.5 mm L
  • 441513- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 13 mm L
  • 441515- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 15 mm L
  • 44206- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 6 mm L
  • 44208- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 8 mm L
  • 442010- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 10 mm L
  • 4420115- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 11.5 mm L
  • 442013- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 13 mm L
  • 442015- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 15 mm L
  • 44276- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 6 mm L
  • 44278- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 8 mm L
  • 442710- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 10 mm L
  • 4427115- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 11.5 mm L
  • 442713- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 13 mm L
  • 442715- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 15 mm L
  • 44306- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 6 mm L
  • 44308- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 8 mm L
  • 443010- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 10 mm L
  • 4430115- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 11.5 mm L
  • 443013- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 13 mm L
  • 443015- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 15 mm L

4.4 mm Crestal Sinus Elevation Drill Set:

  • 44CS154- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 4 mm L
  • 44CS155- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 5 mm L
  • 44CS156- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 6 mm L
  • 44CS157- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 7 mm L
  • 44CS158- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 8 mm L
  • 44CS159- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 9 mm L
  • 44CS1510- 4.4 mm depth stop x 1.5 - 2.2 mm taper x 10 mm L
  • 44CS204- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 4 mm L
  • 44CS205- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 5 mm L
  • 44CS206- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 6 mm L
  • 44CS207- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 7 mm L
  • 44CS208- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 8 mm L
  • 44CS209- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 9 mm L
  • 44CS2010- 4.4 mm depth stop x 2.0 - 2.9 mm taper x 10 mm L
  • 44CS274- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 4 mm L
  • 44CS275- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 5 mm L
  • 44CS276- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 6 mm L
  • 44CS277- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 7 mm L
  • 44CS278- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 8 mm L
  • 44CS279- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 9 mm L
  • 44CS2710- 4.4 mm depth stop x 2.7 - 3.2 mm taper x 10 mm L
  • 44CS304- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 4 mm L
  • 44CS305- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 5 mm L
  • 44CS306- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 6 mm L
  • 44CS307- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 7 mm L
  • 44CS308- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 8 mm L
  • 44CS309- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 9 mm L
  • 44CS3010- 4.4 mm depth stop x 3.0 - 3.9 mm taper x 10 mm L
  • 44CS374- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 4 mm L
  • 44CS375- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 5 mm L
  • 44CS376- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 6 mm L
  • 44CS377- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 7 mm L
  • 44CS378- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 8 mm L
  • 44CS379- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 9 mm L
  • 44CS3710- 4.4 mm depth stop x 3.7 - 4.7 mm taper x 10 mm L

5.0 mm Crestal Sinus Elevation Drill Set:

  • 50CS154- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 4 mm L
  • 50CS155- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 5 mm L
  • 50CS156- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 6 mm L
  • 50CS157- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 7 mm L
  • 50CS158- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 8 mm L
  • 50CS159- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 9 mm L
  • 50CS1510- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 10 mm L
  • 50CS204- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 4 mm L
  • 50CS205- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 5 mm L
  • 50CS206- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 6 mm L
  • 50CS207- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 7 mm L
  • 50CS208- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 8 mm L
  • 50CS209- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 9 mm L
  • 50CS2010- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 10 mm L
  • 50CS274- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 4 mm L
  • 50CS275- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 5 mm L
  • 50CS276- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 6 mm L
  • 50CS277- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 7 mm L
  • 50CS278- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 8 mm L
  • 50CS279- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 9 mm L
  • 50CS2710- 5.0 mm depth stop x 2.7 - 3.2 mm taper x 10 mm L
  • 50CS304- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 4 mm L
  • 50CS305- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 5 mm L
  • 50CS306- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 6 mm L
  • 50CS307- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 7 mm L
  • 50CS308- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 8 mm L
  • 50CS309- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 9 mm L
  • 50CS3010- 5.0 mm depth stop x 3.0 - 3.9 mm taper x 10 mm L
  • 50CS374- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 4 mm L
  • 50CS375- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 5 mm L
  • 50CS376- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 6 mm L
  • 50CS377- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 7 mm L
  • 50CS378- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 8 mm L
  • 50CS379- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 9 mm L
  • 50CS3710- 5.0 mm depth stop x 3.7 - 4.7 mm taper x 10 mm L

5.0 mm Depth Stop Drill Set:

  • 50156- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 6 mm L
  • 50158- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 8 mm L
  • 501510- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 10 mm L
  • 5015115- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 11.5 mm L
  • 501513- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 13 mm L
  • 501515- 5.0 mm depth stop x 1.5 - 2.2 mm taper x 15 mm L
  • 50206- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 6 mm L
  • 50208- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 8 mm L
  • 502010- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 10 mm L
  • 5020115- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 11.5 mm L
  • 502013- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 13 mm L
  • 502015- 5.0 mm depth stop x 2.0 - 2.9 mm taper x 15 mm L
  • 50276- 5.0 mm depth stop x 2.7 - 3.6 mm taper x 6 mm L
  • 50278- 5.0 mm depth stop x 2.7 - 3.6 mm taper x 8 mm L
  • 502710- 5.0 mm depth stop x 2.7 - 3.6 mm taper x 10 mm L
  • 5027115- 5.0 mm depth stop x 2.7 - 3.6 mm taper x 11.5 mm L
  • 502713- 5.0 mm depth stop x 2.7 - 3.6 mm taper x 13 mm L
  • 502715- 5.0 mm depth stop x 2.7 - 3.6 mm taper x 15 mm L
  • 50346- 5.0 mm depth stop x 3.4 - 4.3 mm taper x 6 mm L
  • 50348- 5.0 mm depth stop x 3.4 - 4.3 mm taper x 8 mm L
  • 503410- 5.0 mm depth stop x 3.4 - 4.3 mm taper x 10 mm L
  • 5034115- 5.0 mm depth stop x 3.4 - 4.3 mm taper x 11.5 mm L
  • 503413- 5.0 mm depth stop x 3.4 - 4.3 mm taper x 13 mm L
  • 503415- 5.0 mm depth stop x 3.4 - 4.3 mm taper x 15 mm L