Straight Guide Post - 3.0 mm x 30 mm

The Straight Guide Post is used to orient the Guide Sleeve to the axis of the hole which has been drilled into the cast. The Guide Sleeve is placed over the Guide Post while gel is applied to form the body of the Diagnostic/Surgical Guide.

Dimensions:

• OD 3.0 mm x 30 mm L

Pair with:

• Guide Sleeve - With Cleat - 3.0 mm
• Short Guide Sleeve - With Cleat - 3.0 mm
• Wide Guide Sleeve - With Cleat - 5.3 mm
• Guide Sleeve - Without Cleat - 2.0 mm x 8.0 mm
• Guide Sleeve - With Cleat - With Lip - 4.5 mm
• Guide Sleeve - With Cleat - 3.9 mm x 8 mm
• Guide Sleeve - With Cleat - 5.01 mm x 5.06 mm

Relevant Presentations:

- 2 CONGENITALLY MISSING LATERAL INCISORS WITH IMPLANT SUPPORTED RESTORATIONS
- 2 GRAFTS & REPLACEMENT OF LOWER INCISOR
- CANTILEVERED RESTORATIONS WITH RIDGE AUGMENTATION
- CASE FOR CO-AXIS ANGLED IMPLANTS
- COMPLETE DENTURE CONUS ABUTMENT CASE
- FLAP PROCEDURE COMPARING FLAPLESS PROTOCOL | 3.9 mm DEPTH STOP DRILL SEQUENCE ILLUSTRATED
- HORIZONTAL RIDGE AUGMENTATION UNDER A PARTlAL DENTURE
- IMMEDIATE PLACEMENT • IMMEDIATE LOAD
- IMPLANT RESTORATION #25 & 27
- LATERAL RIDGE AUGMENTATION
- REPLACEMENT OF 4 MANDIBULAR INCISORS
- REPLACING A FAILING IMPLANT | 3.9 mm OSTEOTOMY DRILLS
- RIDGE AUGMENTATION AT TIME OF PLACEMENT
- SHORT WIDE IMPLANTS IN MAXILLARY ARCH
- SINUS AUGMENTATION CRESTAL APPROACH 2° TAPERED GUIDE SLEEVE & INSERT
- SMILES FOR VETS
- STEPS TO MAKING A SURGICAL GUIDE
- USE OF 2-PIECE GUIDE POST WITH ANGLE & LINEAR CORRECTIONS
- USE OF PYTHAGOREAN THEOREM #9 SINGLE IMPLANT CASE