The 3.9 mm Angle-Cut Guide Sleeve With Cleat is recommended for use with the 3.9 mm Depth Stop Drill Set in stereolithographic printed guides.

Dimensions:

• ID 3.9 mm x OD 5 mm x 9 mm L  / with cleat

Pair with:

• 3.9 mm Depth Stop Drill Set
• 3.85 mm Flattening Drill

Relevant Presentations:

- 2 CONGENITALLY MISSING LATERAL INCISORS WITH IMPLANT SUPPORTED RESTORATIONS
- CANTILEVERED RESTORATIONS WITH RIDGE AUGMENTATION
- FLAP PROCEDURE COMPARING FLAPLESS PROTOCOL | 3.9 mm DEPTH STOP DRILL SEQUENCE ILLUSTRATED
- HORIZONTAL RIDGE AUGMENTATION UNDER A PARTlAL DENTURE
- MINIMALLY INVASIVE FLAPLESS SURGERY REPLACING MAXILLARY RIGHT FIRST BICUSPID
- REPLACEMENT OF 4 MANDIBULAR INCISORS
- REPLACING A FAILING IMPLANT | 3.9 mm OSTEOTOMY DRILLS
- USE OF 2-PIECE GUIDE POST WITH ANGLE & LINEAR CORRECTIONS