The 2.0mm Press Fit Guide Sleeve Insert, in conjunction with various drill sizes, is used with many implant systems. It is designed to press fit into the Angle-Cut Guide Sleeve With Cleat and is removable with the Insert Removal Tool. Can be used with Versah Drills up to 4.5mm for osseodensification.
Instructions for use:
- The surgeon (or assistant) will need to use the Insert Removal Tool to release the Insert before placing the next larger size in a multi drill sequence.
- Inserts release easier when fabricated in an acrylic guide than if gripped between your fingers.
-
The use of the graduated size Inserts for increasing drill sizes produces more accurate results. Inserts are available in 1.6mm - 4.6mm inside diameter increments and are compatible with the various drill sizes used with many implant systems.
- Guide Sleeve Inserts are pressed down into a Sleeve to obtain a press fit to prevent Inserts from spinning while drilling.
Pair with: