Serial Guide Sleeve - With Cleat - 4.5 mm

The Serial Guide Sleeve is used with Serial Guide Sleeve Inserts ranging from 1.0 mm to 4.0 mm. Measure the drill diameter before ordering inserts. Inserts are press fit and require an Insert Removal Tool (IRT) or 4.5 mm Fabrication Insert (FABIN).

Dimensions:

• ID 4.5 mm x OD 5 mm x 5 mm H / with cleat

Pair with:

• Angle-Cut Guide Sleeve - With Cleat - 3.0 mm
• 4.5 mm Fabrication Insert (FABIN)
• 4.84 mm Fabrication Insert (FABIN)
• Serial Guide Sleeve Insert - 1.0 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 1.7 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 2.0 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 2.25 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 2.5 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 2.75 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 3.0 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 3.25 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 3.5 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 3.75 mm for 4.5 mm Guide Sleeve
• Serial Guide Sleeve Insert - 4.0 mm for 4.5 mm Guide Sleeve
• Insert Removal Tool (IRT)

Relevant Presentations:

- USE OF PYTHAGOREAN THEOREM #9 SINGLE IMPLANT CASE