Wide Guide Sleeve - With Cleat - 5.3 mm

The Wide Diameter Guide Sleeve With Cleat is the widest guide sleeve and is to be used with Serial Guide Sleeve Inserts ranging from 2.6 mm to 4.2 mm. Measure the drill diameter before ordering inserts. Inserts are Press Fit and require an Insert Removal Tool (IRT) or 5.3 mm Fabrication Insert (FABIN).

Dimensions:

• ID 5.3 mm x OD 6.4 mm x 5 mm H / with cleat

Pair with: 

• Angle-Cut Guide Sleeve - With Cleat - 3.0 mm
• 5.3 mm Fabrication Insert (FABIN)
• Serial Guide Sleeve Insert - 2.6 mm for 5.3 mm Guide Sleeve
• Serial Guide Sleeve Insert - 3.0 mm for 5.3 mm Guide Sleeve
• Serial Guide Sleeve Insert - 4.0 mm for 5.3 mm Guide Sleeve
• Serial Guide Sleeve Insert - 4.2 mm for 5.3 mm Guide Sleeve
• Insert Removal Tool (IRT)
• Straight Guide Post - 3.0 mm x 30 mm