The Serial Guide Sleeve is used with Serial Guide Sleeve Inserts ranging from 1.0mm to 4.0mm. Measure the drill diameter before ordering inserts. Inserts are press fit and require an Insert Removal Tool (IRT) or 4.5mm Fabrication Insert (FABIN).

Dimensions:

• 4.5mm ID x 5mm OD x 5mm H / with cleat

Pair with:

• 2300 - Angle-Cut Guide Sleeve - With Cleat - 3.0mm
• 2405 - 4.5mm Fabrication Insert (FABIN)
• 2406 - 4.84mm Fabrication Insert (FABIN)
• 2408 - Serial Guide Sleeve Insert - 1.0mm for 4.5mm Guide Sleeve
• 2409 - Serial Guide Sleeve Insert - 1.7mm for 4.5mm Guide Sleeve
• 2410 - Serial Guide Sleeve Insert - 2.0mm for 4.5mm Guide Sleeve
• 2415 - Serial Guide Sleeve Insert - 2.25mm for 4.5mm Guide Sleeve
• 2420 - Serial Guide Sleeve Insert - 2.5mm for 4.5mm Guide Sleeve
• 2425 - Serial Guide Sleeve Insert - 2.75mm for 4.5mm Guide Sleeve
• 2430 - Serial Guide Sleeve Insert - 3.0mm for 4.5mm Guide Sleeve
• 2435 - Serial Guide Sleeve Insert - 3.25mm for 4.5mm Guide Sleeve
• 2440 - Serial Guide Sleeve Insert - 3.5mm for 4.5mm Guide Sleeve
• 2445 - Serial Guide Sleeve Insert - 3.75mm for 4.5mm Guide Sleeve
• 2450 - Serial Guide Sleeve Insert - 4.0mm for 4.5mm Guide Sleeve
• 4040 - Insert Removal Tool (IRT)

Relevant Presentations:

- USE OF PYTHAGOREAN THEOREM #9 SINGLE IMPLANT CASE