Press Fit Guide Sleeve Insert - 1.6mm for 3.0mm Guide Sleeve

$15.00
Shipping calculated at checkout.

The surgeon (or assistant) will need to use the 4040- Insert Removal Tool (IRT) to release the insert before placing the next larger size insert in a multi drill sequence. Inserts release easier when fabricated in an acrylic guide than if gripped between your fingers. The use of the graduated size inserts for increasing drill sizes produces more accurate results. Inserts are available in 1.6mm - 4.6mm inside diameter increments and are compatible with the various drill sizes used with many implant systems. Guide sleeve inserts are pressed down into a sleeve to obtain a press fit to prevent inserts from spinning while drilling.

The 1.6mm Press Fit Stainless Insert, in conjunction with various drill sizes, is used with many implant systems. It is designed to press-fit into the stainless steel C2305- Anterior Guide Sleeve - With Cleat - 3.0mm ID and is removable with the Insert Removal Tool.

1.6mm ID x 9.7mm L

Relevant Presentations:

2 GRAFTS & REPLACEMENT OF LOWER INCISOR
GREATER ACCURACY WHEN USING SMALLER DIAMETER DIAGNOSTIC GUIDE SLEEVES
SKU: 2316