A Tapered Guide Sleeve is tapered 2° with a wider inside diameter at the top and narrowing at the bottom. The 2° taper is compatible with Versah drills or other tapered drills.
Use with 9008 - Angle-Cut Guide Sleeve Insert - 3.0mm Insert for 4.5mm Angle-Cut Sleeve and 9009 - Press Fit Guide Sleeve Insert - 2.0mm for 4.5mm Angle-Cut Sleeve.
4.5mm ID x 2° angle-cut tapered OD x 8mm stainless guide sleeve
PRESENTATIONS:
SINUS AUGMENTATION CRESTAL APPROACH 2° TAPERED GUIDE SLEEVE & INSERT