Press Fit Guide Sleeve Insert - 2.0mm for 3.0mm Guide Sleeve

$15.00
Shipping calculated at checkout.

The surgeon (or assistant) will need to use the Insert Removal Tool (IRT- 4040) to release the insert before placing the next larger size insert in a multi drill sequence. Inserts release easier when fabricated in an acrylic guide than if gripped between your fingers. The use of the graduated size inserts for increasing drill sizes produces more accurate results. Inserts are available in 2.0mm - 4.6mm inside diameter increments and are compatible with the various drill sizes used with many implant systems. Guide sleeve inserts are pressed down into a sleeve to obtain a press fit to prevent inserts from spinning while drilling.

2.0mm Press Fit Insert for 3.0mm Guide Sleeve

The 2.0 mm Press Fit Stainless Insert, in conjunction with various drill sizes, is used with many implant systems. It is designed to press-fit into the stainless steel 3.0 mm Straight Guide Sleeve and is removable with the Insert Removal Tool (IRT - 4040). 

SKU: 2310