2-Piece Guide Post - 3.0mm Offset Lower Part

Shipping calculated at checkout.

Offsets are designed for linear corrections that reposition the implant.


  • Guide Post Total Length: 17mm
  • Lower Shaft: OD - 3/32in x 10mm L - octagonal - 8 flat sides
  • Platform: rectangular shape- 4 flat sides (1.0mm thick)- represents the mesial, distal, buccal, & lingual surfaces of the tooth to assist in making linear corrections to the surgical guide
  • Upper Shaft: OD - 1/16in x L 5.0mm - extends up from platform:
  • Offset: from lower shaft - 3.0mm
  • Bending Point: 1.0mm between platform & lower shaft to accommodate bend for angle corrections.


  • Upper Removable Parts (URP) are positioned over upper shaft to orient the Guide Sleeve while the light cured resin is being applied to fabricate the surgical guide


  • Site evaluation with cone beam to assess & determine linear & angle corrections is necessary to fabricating surgical guide for accurate implant placement.
  • Various size Upper Removable Parts (URP) can be placed on the upper shaft of the 2- Piece Lower Guide Post to orient and align the appropriate size Guide Sleeve while the Triad® gel or other light cured resin is being applied to fabricate the surgical guide. (SEE 2-Piece Guide Post Parts Diagram)


  • Designed for linear corrections that reposition the implant in either one of 8 directions with/without changing the angle for the surgical guide sleeve.
  • Can be easily bent in Bending Tool to accommodate angle corrections.
  • Use of the 2-Piece offset Guide Post allows easy removal of the surgical guide when the Upper Removable Part of the guide post is removed, leaving the 1/16” diameter part of the lower post. The URP must be removed before the surgical guide is removed from the cast.
  • All diameter guide sleeves can be used by changing the coordinating diameter of the Upper Removable Part of the 2-Piece Guide Post.
  • Upper Removable Parts (URP) available sizes: in mm OD: 3, 2.7 3.0, 3.9, 4.15, 4.16, 4.5, 4.8, 4.9, 5.15, 5.26, 5.5.  Paired Recommendation slightly smaller, OD - 0.03 in., than the guide sleeve's ID).
  • 2-Piece Guide Post Lower Parts available in mm offset dimensions: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0



QUESTIONS: Customerservice@deplaque.com 

CASE SPECIFIC QUESTIONS: TeamViewer@swmeit4@gmail.com

SKU: C20230